HL2+ 55mm Case Front End Plate
Some HL2+ builders are choosing to use the new HL2 IO Board. Apparently the 40mm case with the IO board rear end plate is very tight/interferes with the IO board. To help with this issue, a new HL2+ 55mm front end plate has been designed (and is for use with a 55mm case the builder buys). There is no room or accommodation for the HL2+ power switch on the IO board rear end plate, so it has been incorporated into the HL2+ 55mm front end plate. The HL2+ power switch should really be on the front anyway!
An end plate is $15 shipped for standalone orders in the USA, $31 for International (there is nothing I can do about the high cost of International shipping, sorry), $10 if included as part of a V4.0 AK4951 Companion Board Kit order for both USA and International.
AK4951 Companion Board Mounting Bracket suitable for use with the 55mm case. It is the same bracket that is used modified with the 40mm case, but without the modification.